全部分类
射频探针 40A
关键词：
所属分类：
产品参数
MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz.
With its individually spring loaded, Beryllium-Copper, Tungsten, or Nickel tips, the Model 40A provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements.
The Model 40A microwave probe also provides direct viewing of the probe tips for accurate positioning.
The Model 40A can be mounted in various adaptors for use with standard microwave probe stations or attached to thin blades for use with dc probe needles on a probe card or multi-contact wedge. Custom mounts are available as well.
Any pitch (tip spacing) from 25 to 2540 microns may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints.
Connection to the Model 40A is through a female K connector (2.9mm) which is 3.5mm connector compatible.
相关产品
光学斩波器和斩波片斩波器特性晶体稳定的锁相回路抑制低频漂移和相位抖动谐波，次谐波和分数谐波的和频和差频输出微处理器控制提供单频和双频叶片为泵浦探测和其它非线性实验提供谐频叶片用户设置存储在非易失性RAM，并可从中调用USB接口包含控制软件包MC2000B光学斩波器是一种精密仪器，利用先进的功能调制连续光束发出的光。其控制平台使用了锁相回路(PLL)电动速度控制设计，能精确保持斩波速率和参考信号的相
特性运动永磁电机设计，具有更快的响应(±0.2度是400微秒)高精密度(15微弧度)光学反射镜位置探测电流阻尼和错误限制器的模拟控制电路可选择反射镜镀膜(见下表)也提供客户定制的镀膜 该高速扫描振镜定位系统设计用于集成到OEM或定制的直径小于10毫米的激光束操控应用中。每个系统包括一个双轴振镜电机和反射镜组、相关的驱动卡和驱动卡散热器。另外还提供一个基板，使之能安装到Ø1/2英寸接杆和倾斜平台。低
特性厚度：60mm(2.4英寸)可供选择的尺寸范围从12英寸x12英寸(300 mmx300 mm)到36英寸x48英寸(900 mmx1200 mm)每个面包板都经过单独优化，测试，发货时附带一份测试数据报告证书边缘小孔距平台边缘1/2英寸(12.5mm)，使可用区域最大化顶板：任意1平方米区域内的表面平整度为±0.1mm5mm厚的不锈钢顶板和底板,以及全钢侧板全部采用钢-钢连接可以提高热稳定性
ONLINE MESSAGE
在线留言
*注：请务必信息填写准确，并保持通讯畅通，我们会尽快与你取得联系
微信扫一扫
关注上海维宁
上海维宁科技发展有限公司
- 地址：上海市浦东新区乳山路206号申富大厦3楼
- 座机：(021) 6325 1915
- 手机：1360-173-5656
- 邮箱：weiningtech@126.com